HIGH PRESSURE AUTOCLAVES

₹20000

Construction

All stainless steel Triple walled construction, lid is made of thick die pressed SS 304 sheet in mirror finish. The unit is fitted with 8 wingnuts to hold the lid at high pressure.

Autoclave Is Equipped With
  • Steam release valve.
  • Spring loaded safety valve & stop cock.
  • Water inlet and water outlet valves.
  • Water level indicating gauge glass with stainless steel guard.
  • Pressure gauge.
  • Double Heating Element.
  • Two power cords for each heating elements
Categories: , Tag:

Description

Working Pressure
  • The normal recommended pressure for sterilisation process is (15 psi -17 psi).
  • Working Temperature: 121°C
  • Chamber size & Capacity: 16″ Dia X 24″ Ht. (400 x600mm)

    Note: Special sizes can be fabricated as perthe customer’s requirement.

  • Mode of Heating: Electrically heated by two immersion heaters of 3000 watts each 220 volts 50Hz.

Optional Accessories:

    1. Automatic Pressure Control Switch. This semi-automatic device controls the pressure inside the chamber mechanically and cuts-off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level.
    2. Automatic Water Cut-off Device – This device is a safety device which protects the heaters from running dry. This device ensures that the machine is automatically switched off in case the desired water level falls below the prescribed level.Construction

You may also like

-